Challenger series – Our Lightest Handheld Laser!
- Light Weight Powerful Design
The challenger is powered by one 14500 lithium rechargeable battery and weighs approximately 140 grams, making this the lightest handheld laser we have ever produced! Even better, it emits 10 - 20 times more power than the typical lightweight green or red laser pointer!
The Challenger has an adjustable focus, and it's capable to use multi colors laser diodes. You can select either the 1.6-watt, 445nm blue laser diode or the 1.6-watt, 465nm bright blue laser diode! Optimized for low power settings and rare wavelengths; you will only find wavelengths of 455nm, 488nm, 492nm and 525nm at Sanwu Lasers!
Purchase the Challenger in two different housings! The standard smooth housing with an engraved chassis or a stylishly engraved housing featuring a tornado swirl around the upper and lower sections of the laser.
As one of the leading handheld laser manufacturers, we always ensure top-notch quality of all of our products.
- Electronic Safety Lock(For multi mode only)
To prevent unauthorized use, half-press the button three times within the first three seconds immediately after the laser light is visible. The laser should switch to strobe mode before entering the safety lock(dim laser dot).
Power on the laser and wait one second. Next, half-press the button five times within three seconds and then wait another 2 seconds. The laser should now switch to strobe mode indicating that the laser is unlocked.
The laser memorizes the operational mode last used for more than five seconds. This feature allows you to start the laser into the last operating mode without entering the button sequence pattern.
The Challenger has a fully adjustable focus. Just twist the attack head located at the top of the laser to adjust the beams focus.
Our lasers come with several battery protections to protect the laser and the battery: over-discharge protection, over-charge protection and reverse polarity protection.
- How to Power the Laser On
Use One 14500 lithium-ion unprotected batteries to power the Challenger. Insert the batteries with the positive side going in first. Next, screw on the base cap and press the power button to operate the laser.
|
